QH : Details


    • 2Souls EVO2 slider dropouts with integrated chain-tensioner allow an adjustment of chainstaylength of +/-14mm. The 3D design of the dropouts makes the frames`s rear end torsionally stiff and  leads the braking forces directly into the seatstays. The 7075 T6 aluminum plates are available for singlespeed, internal gear hub or derailleur set up.


    • The curved stays and yoke with integrated stainless steel ISCG (05) have been used successfully for the past 5 years in our Funtail 41.5. In combination with the QH`s  split seattube  it permits the use of big 2.4"+ tires with sufficient mudclearance in spite of extra short stays` length.


    • optional direct mount Standard derailleur braze on for puristic look especially in gear hub and SSp set up.


    • The bottom open seattube is not only a visual feature but fully functional as it allows complete seatpost insertion.


    • Welded Stainless steel seattube shim. 34.9mm clamp size for 31.6mm seatpost.


    • 44mm Standard Headtube for use with either 1 1/8 or tapered forks. Use of an "Angleset" allows adjustments of stearing angle. Brass 2Souls logo headbatch with stainless steel screws


    • Stainless steel BottomBracket shell.


    • The number of cables required differs according to the set up of the frame. Therefore the QH uses a modular cableguide system where 1-4x cableguides can be used. All braze ons are stainless steel.


    • Frame material is size specific Reynolds 853 DZB tubing. In addition to its high tensile strength these tube become harder under the heat of welding. Combined with custom drawn double butting specifications they make gussets dispensable and allow that clean, pure "steel look".


    • Each frame gets galvanic zinc plated before it is powder- or ceramiccoated.


    • Leather decals with branded logo and lacing.


    • CEN tested
    • Please go to your screens right upper corner and click     to view detail pics.
joomla template